Analisa Karakteristik Getaran Pada Mesin Stone Crusher Berdasarkan Kapasitas Pemecah Batu Koral 50 Ton/Jam Pada Daerah Horizontal, Vertikal dan Longitudinal Berdasarkan Time Domain

  • Suriady Sihombing Prodi Teknik Mesin Universitas HKBP Nommensen
  • Waldemar Naibaho Universitas HKBP Nommensen
  • Wilson Nababan Universitas HKBP Nommensen
  • Amran Sinaga Teknik Mesin, Universitas HKBP Nommensen
DOI: https://doi.org/10.36655/sprocket.v4i2.895
Keywords: Machine Stand, Primary Crusher, Secondary Crusher, Tertiary CrusherISO 10816-3 Standard

Abstract

Stone Crusher Machine is one type of machine that is very popularly used among road construction in Indonesia, whether it is used for road or building transportation purposes where it is necessary to know how to analyze the vibration characteristics of the Stone Crusher machine based on the capacity of breaking coral in horizontal, vertical and longitudinal areas. based on the time domain. The research method is carried out by collecting data on the magnitude of the deviation, speed and acceleration that arise due to the process of breaking coral so that it produces several dimensions of the size of crushed stone. This study conducted tests at three points, namely the primary crusher, secondary crusher and tertiary crusher with a capacity of 50 tons/hour. Based on the measurement results, it is found that the highest vibration occurs in the horizontal direction of the secondary crusher machine seat where the displacement is 125.3 µm in the horizontal direction at 15 seconds, the largest velocity (Velocity) is 4.79 mm/s in the primary crusher. horizontal direction at the 45th second. and the magnitude of Acceleration (Acceleration) 1236 mm/s2 is found in the tertiary crusher vertical direction at the 45th second. According to the ISO 10816-3 standard, the vibration response results at the highest speed are 4.79 mm /s, categorized in zone B is light green, the vibration of the machine is good and can be operated without restrictions.

References

Acoustical System And Tecnologies , Saint Petersburg, Russia ,2004.
Bagiasna, K., “ Analisis Sinyal Getaran, “ PT. Krakatau Engineering.
Barkov, A. V, Barkova, N.A, “ Artificial Inteligence System For Machine Condition and Diagnosties by vibration,” Proccedings of the SaintPeterburg, USA, 1991
Bodre, R,”The Principles of Vibration theory and Analysis,” DLI Engineering Corp Bainbridge Island, W A 98110.
B.H Amstead ,Teknologi Mekanik jilid 1 dan 2 , Penerbit Erlangga ,1986.
Dynamometer, < http://www. Asynchronous dynamometer.com >
Dynaseq, Monitoring group, 12 Juli 2006, , http: // www. Dynaseq.co.uk.>. VibrationTesting Equipment For “
Jenis Material Pemecah Batu Stone Crusher http://arparts.id/mengenal-mesin-stone- crusher/
Proses Produksi Stone Crusher http://eprints.undip.ac.id/34213/6/1746_chapter_II.pdf
Thomsom,TW, (1986), Teori Getaran dengan Penerapan, Edisi ke 2, Penerbit Erlangga, Jakarta
Published
2023-02-12
How to Cite
Sihombing, S., Naibaho, W., Nababan, W., & Sinaga, A. (2023). Analisa Karakteristik Getaran Pada Mesin Stone Crusher Berdasarkan Kapasitas Pemecah Batu Koral 50 Ton/Jam Pada Daerah Horizontal, Vertikal dan Longitudinal Berdasarkan Time Domain. SPROCKET JOURNAL OF MECHANICAL ENGINEERING, 4(2), 173-180. https://doi.org/https://doi.org/10.36655/sprocket.v4i2.895
Issue
Vol 4 No 2 (2023): Edisi Februari 2023
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Penulis yang menerbitkan dengan  SPROCKET JOURNAL OF MECHANICAL ENGINEERING menyetujui ketentuan berikut :

  • Penulis memegang hak cipta dan memberikan jurnal hak penerbitan pertama dengan karya yang dilisensikan secara bersamaan di bawah Lisensi Internasional Creative Commons Atribusi 4.0 . yang memungkinkan orang lain untuk berbagi karya tersebut dengan pengakuan atas kepengarangan karya dan penerbitan awal dalam jurnal ini.
  • Penulis dapat membuat pengaturan kontraktual tambahan yang terpisah untuk distribusi non-eksklusif atas versi jurnal yang diterbitkan dari suatu karya (misalnya, mempostingnya ke repositori institusional atau menerbitkannya dalam sebuah buku), dengan pengakuan atas penerbitan awalnya di jurnal ini.
  • Penulis diizinkan dan didorong untuk mengunggah karya mereka secara daring (misalnya, di repositori institusi atau di situs web mereka) sebelum dan selama proses penyerahan, karena hal ini dapat mengarah pada pertukaran yang produktif, serta kutipan yang lebih awal dan lebih banyak dari karya yang diterbitkan (Lihat  Pengaruh Akses Terbuka ).