Analisa Kebisingan Pada Alat Berat Wheel Loader Wa-350 Berdasarkan Perbandingan Jarak 50, 100, 150 Cm Dan Kapasitas
Abstract
Wheel loader is a tool that facilitates work by using hydraulic energy. Wheel loader testing is carried out by looking for noise data arising in the combustion chamber. There are several stages that must be done, namely the first step is to prepare a sound level meter as a noise detection device for heavy equipment, wheel loader, then take measurements with several variations in the distance between the combustion chamber and the sound level meter. In the next step we can find out the noise level read at the sound level meter with ideal, medium, and maximum rotation on the WA-350 wheel loader. So that the Noise Threshold Value according to Permenaker No. per-51 / MEN / 1999, ACGIH, 2008 and SNI 16-7063-2004 is 85 dB. So the noise produced by the Wheel Loader above the NAB Permenaker 104.7dB can cause tingling, unwell, hearing saturation, stomach pain, and circulatory problems. It is recommended that workers are required to use earmuffs or ear muffs.
References
[2] T. Siagian, “Analisa Getaran Dan Koefisien Korelasi Antara Getaran Pada Mesin (Engine) Dan Tempat Duduk Operator (Seat) Dengan Variasi Tingkat Kebisingan Mesin Forklift Type Fd 30 Pa Sumitomo,” J. Al Ulum LPPM Univ. Al Washliyah Medan, vol. 10, no. 2, pp. 54–60, 2022.
[3] N. A. SATRIO, “Pengukuran Serta Analisa Getaran Dan Kebisingan Pada Spindle Mesin Bubut Run Master Model No. Run-330x1000rr Dengan Serial No. 08210810080”.
[4] L. O. N. Fajrin, “Analisis Getaran dan kebisingan Mesin Diesel Type TV1 Akibat Pengaruh Purifikasi Bahan Bakar= Analysis Of The Vibration And Noise Of The TV1 Type Diesel Engine Due To The Effect Of fuel Purification,” 2022.
[5] M. Y. Raynonto et al., Perencanaan Produktivitas Alat Berat Bagi Pemula. Tohar Media, 2023.
[6] D. N. Setiawati and A. Meddeppungeng, “Analisis produktivitas alat berat pada proyek pembangunan pabrik krakatau posco zone IV di Cilegon,” Konstruksia, vol. 4, no. 2, 2013.
[7] E. N. Kulo, J. E. Waani, and O. H. Kaseke, “Analisa Produktivitas Alat Berat Untuk Pekerjaan Pembangunan Jalan (Studi Kasus: Proyek Pembangunan Jalan Lingkar SKPD Tahap 2 Lokasi Kecamatan Tutuyan Kabupaten Bolaang Mongondow Timur),” J. Sipil Statik, vol. 5, no. 7, 2017.
[8] “Apa itu Wheel Loader.” OMNIA MACHINERY, Desember 2021. [Online]. Available: https://www.omniamachinery.com/id/2021/12/what-are-wheel-loaders/
[9] R. A. Khalik and A. R. Hermawanto, “Analisis Kebisingan Pada Ruangan Mesin Border Terhadap Kelelahan Operator Mesin Border Di Home Industri Berkah Border,” Sist. J. Ilm. Nas. Bid. Ilmu Tek., vol. 7, no. 2, pp. 34–44, 2019.
[10]I. Maha Putra, I. Darmadi, and I. Aryasih, “Hubungan Usia, Masa Kerja Dan Penggunaan Sumbat Telinga Dengan Keluhan Subyektif Pekerja,” 2018.
[11]F. ZUHRA, “Pengaruh Kebisingan Terhadap Status Pendengaran Pekerja Di Pt. Kia Keramik Mas Plant Gresik,” 2019.
[12]G. Baumgartel, R. Divine, C. Johnson, K. R. Wells, W. Wuest, and SCIENCE APPLICATIONS INTERNATIONAL CORP MCLEAN VA, “Environmental Assessment Base Civil Engineer Complex, Altus Air Force Base, Oklahoma,” 2003.
[13] R. F. Barron, Industrial noise control and acoustics. CRC Press, 2002.
[14] C. M. Harris, Handbook of acoustical measurements and noise control. McGraw-Hill New York, 1991.
[15]L. Knopoff, “Attenuation of elastic waves in the earth,” Phys. Acoust., vol. 3, no. part B, pp. 287–324, 2012.
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with SPROCKET JOURNAL OF MECHANICAL ENGINEERING agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License . that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).