Analisa Laju Korosi dan Kekerasan Pada Stainless Steel 316 L Dalam Larutan 10 % NaCl Dengan Variasi Waktu Perendaman

  • Arga Jeremia Sinaga Universitas HKBP Nommensen
  • Charles Manurung Universitas HKBP Nommensen
DOI: https://doi.org/10.36655/sprocket.v1i2.186
Keywords: corrosion rate, hardness, 316L, 10% NaCl, soaking time

Abstract

Corrosion is an electrochemical reaction between metals and the environment that causes corrosion and decreases the quality of metals. Steel is a metal material that is widely applied in the industrial world. Stainless steel is stainless steel that is resistant to corrosion because it has an alloying element of at least 18% chrome and 8% nickel. To find out the superiority of stainless steel as a construction material, research on local corrosion of stainless steel needs to be done. For this reason, research on corrosion is carried out by using a 10% NaCl salt solution by varying the immersion time of stainless steel in corrosive media. From the research results it is known that the type of corrosion that occurs in specimens is the type of uniform corrosion. Likewise with the value of violence will decrease if the stainless steel is soaked longer.

References

1. Yudha Kurniawan Afandi, Irfan Syarif Arief, dan Amiadji, Analisa Laju Korosi pada Pelat Baja Karbon dengan Variasi Ketebalan Coating, JURNAL TEKNIK ITS Vol. 4, No. 1, (2015)
2. Djoko Hadi Pratikno, Jan Setiawan, Elektrokimia Baja Tahan Karat SS 316 Dalam Media Nano Fluida, Jurnal Urania Vol. 25 No. 1, Februari 2019: 1−70
3. I.G. Ayu Arwati, Edy Herianto Majlan, Wan Ramli Wan Daud, Loh Kee, Temperature Effects on Stainless Steel 316L Corrosion in the Environment of Sulphuric Acid (H2SO4), IOP Conf. Series: Materials Science and Engineering 343 (2018)
4. R. Kohar, Laju dan bentuk korosi pada baja karbon menengah yang mendapat perlakuan pada suhu austenite diuji di dalam larutan NaCl 3 N, Jurnal Desiminasi Teknologi, Volume 1, Nomor 1, Januari 2013
5. Afriwan Wahyu Pratama, Paridawati, Tri Santoso, Analisa laju korosi dan struktur mikro terhadap baja karbon rendah SS400 pada metode pelapisan hot dip galvanizing, Prosiding Seminar Nasional Energi dan Teknologi, UNISMA BEKASI, Juni 2019.
6. Wahyu Kheren Sabyantoro, Helmy Purwanto dan Muhammad Dzulfikar, Analisis laju korosi dengan aliran media korosi HCL 10% pada material baja ASTM A36 dengan sudut bending, Momentum, Vol. 15, No. 1, April 2019
Published
2020-03-14
How to Cite
Sinaga, A., & Manurung, C. (2020). Analisa Laju Korosi dan Kekerasan Pada Stainless Steel 316 L Dalam Larutan 10 % NaCl Dengan Variasi Waktu Perendaman. SPROCKET JOURNAL OF MECHANICAL ENGINEERING, 1(2), 92-99. https://doi.org/https://doi.org/10.36655/sprocket.v1i2.186
Issue
Vol 1 No 2 (2020): Edisi Februari 2020
Section
Articles

Authors who publish with  SPROCKET JOURNAL OF MECHANICAL ENGINEERING agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License . that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).