Analisa Pipa Heat Exchanger (Cooling Tube) Bervariasi Pada Turbine Guide Bearing Pembangkit Listrik Tenaga Air Siguragura
Abstract
A heat exchanger is a medium used to produce heat transfer from one fluid to another. Heat Exchanger can be used to raise the temperature or as a heater (regenerator) or lower the temperature or as a coolant (recuperator) depending on the view of heat transfer that occurs. Heat exchangers have been widely used in industries such as the chemical industry, paper industry, power plants, and other industries. In the example, each machine unit uses a heat exchanger media (especially rotary type machines) to keep the bearing temperature in normal temperature even though the unit is operated continuously or continuously. This study will analyze the temperature drop that occurs when the length of the heat exchanger pipe is added to the turbine guide bearing of PLTA Siguragura. From the research results, the maximum temperature on the guide bearing cooling tube reaches 47.3 [° C], the overall heat transfer coefficient on the guide bearing cooling tube is 98.87 [W / m²ºC], ∆Tmin on the guide bearing cooling tube installed (with 2 layers) is 14.1 [° C] and ∆Tmin which can be achieved with a cross-sectional area of 5.73 [m²] is 6.63 [° C]
References
2. 2010, Tarik Al-Shemmeri, Engineering Thermodynamics (First Edision), ISBN 978-87-7681-670-4
3. http://www.sainsseru.com/2018/01/perpindahan-kalor-konduksi-konveksi-radiasi.html
4.http://seputarpengertian.blogspot.com/201707/pengertian-perpindahan-kalor-secara-.html
5. http://sriwulandaritermodinamika.blogspot.com/2015/03/alat-penukar-kalor-heat-exchanger.html
6. http://sriwulandaritermodinamika.blogspot.com/2015/03/alat-penukar-kalor-heat-exchanger.html
7. https://artikel-teknologi.com/macam-macam-heat-exchanger-alat-penukar-panas-bagian-5/
8. 2014, Ali Hasimi Pane, Alat Penukar Kalor (Heat Exchanger), Advance Learning Consultant
9. 1989, Roger Kinsky, Heat Engineering (An Introduction to Thermodinamics)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with SPROCKET JOURNAL OF MECHANICAL ENGINEERING agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License . that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).