Karakteristik Pembakaran dan Emisi Gas Buang Mesin Diesel Stasioner Berbahan Bakar Campuran Solar (Cinnamon Oil dan Basil Oil)
Abstract
The depletion of fossil fuels and stringent emission regulations demand renewable additives that enhance diesel combustion while reducing pollutants. This study experimentally investigates the combustion characteristics and exhaust emissions of diesel blended with cinnamon oil and basil oil as dual additives in a single-cylinder stationary diesel engine. Essential oils were mixed with diesel at 5%, 10%, and 15%, either singly or in combination, and tested at 1500 rpm under varying loads (0–100%). Results showed that the dual additive blend at 10% (DCB10) yielded the best performance, reducing CO and HC emissions by up to 40.9% and 32.1%, respectively, compared to neat diesel. However, NOx emissions increased by 8.5% due to higher combustion temperatures and oxygen availability. The synergistic effect of cinnamon oil's low viscosity and basil oil's antioxidant properties improved atomization and oxidation kinetics, leading to more complete combustion. Despite the NOx trade-off, the net environmental benefit is positive, positioning dual essential oil blends as promising bio-additives for cleaner diesel operation.
References
[2] S. Babamohammadi, A. R. Birss, H. Pouran, J. Pandhal, and T. N. Borhani, “Emission control and carbon capture from diesel generators and engines: A decade-long perspective,” Carbon Capture Sci. Technol., vol. 14, p. 100379, Mar. 2025, doi: 10.1016/j.ccst.2025.100379.
[3] M. L. Wright and A. C. Lewis, “Decarbonisation of heavy-duty diesel engines using hydrogen fuel: a review of the potential impact on NOx emissions,” Environ. Sci. Atmospheres, vol. 2, no. 5, pp. 852–866, 2022, doi: 10.1039/D2EA00029F.
[4] A. B. V. Barboza, S. Mohan, and P. Dinesha, “Use of biofuel with turpentine oil additive in a compression ignition engine: a green initiative to fulfill sustainable development goals,” Cogent Eng., vol. 11, no. 1, p. 2364840, Dec. 2024, doi: 10.1080/23311916.2024.2364840.
[5] Deepalika, V. Kumar, and A. K. Choudhary, “A comparative review on evaluation of performance, combustion, and emission characteristics of biodiesel blends enriched with hydrogen, additives and their combined effect,” Therm. Sci. Eng. Prog., vol. 46, p. 102185, Dec. 2023, doi: 10.1016/j.tsep.2023.102185.
[6] S. K. R. Devasani, S. Vodnala, D. Singarapu, and J. N. Nair, “A comprehensive review on performance, combustion and emissions of ternary and quaternary biodiesel/diesel blends,” Environ. Sci. Pollut. Res., vol. 29, no. 34, pp. 51083–51094, Jul. 2022, doi: 10.1007/s11356-021-17504-4.
[7] K. Ramalingam, S. Vellaiyan, E. P. Venkatesan, S. A. Khan, Z. Mahmoud, and C. A. Saleel, “Challenges and Opportunities of Low Viscous Biofuel─A Prospective Review,” ACS Omega, vol. 8, no. 19, pp. 16545–16560, May 2023, doi: 10.1021/acsomega.3c00387.
[8] A. T. Hoang et al., “A feasible and promising approach for diesel engine fuelled with a blend of biodiesel and low-viscosity Cinnamon oil: A comprehensive analysis of performance, combustion, and exergy,” J. Clean. Prod., vol. 401, p. 136682, May 2023, doi: 10.1016/j.jclepro.2023.136682.
[9] N. Kapilan and R. P. Reddy, “Effect of Basil Oil on the Performance of Biodiesel Fuelled Agricultural Engine,” Acta Technol. Agric., vol. 23, no. 4, pp. 155–160, 2020, doi: 10.2478/ata-2020-0025.
[10] R. Subagyo et al., “Combustion characteristics of Biosolar B20 fuel enhanced with clove oil (syzygium aromaticum) bioadditives,” EUREKA Phys. Eng., no. 1, pp. 13–23, Jan. 2025, doi: 10.21303/2461-4262.2025.003437.
[11] A. A. Permanasari, M. Najib. Mauludi, S. Sukarni, P. Puspitasari, and N. M. Mohamed, “Exhaust gas emission and performance in diesel engine using diesel-biodiesel blends with orange essential oil bioadditive,” AIP Conf. Proc., vol. 2447, no. 1, p. 030020, Oct. 2021, doi: 10.1063/5.0072539.
[12] P. Chen, Z. Wang, J. Wu, H. Xia, C. Tai, and R. Li, “Effects of phenolic antioxidants on biodiesel oxidative stability and emission,” Environ. Prog. Sustain. Energy, vol. 38, no. 5, p. 13203, Sep. 2019, doi: 10.1002/ep.13203.

This work is licensed under a Creative Commons Attribution 4.0 International License.
Penulis yang menerbitkan dengan SPROCKET JOURNAL OF MECHANICAL ENGINEERING menyetujui ketentuan berikut :
- Penulis memegang hak cipta dan memberikan jurnal hak penerbitan pertama dengan karya yang dilisensikan secara bersamaan di bawah Lisensi Internasional Creative Commons Atribusi 4.0 . yang memungkinkan orang lain untuk berbagi karya tersebut dengan pengakuan atas kepengarangan karya dan penerbitan awal dalam jurnal ini.
- Penulis dapat membuat pengaturan kontraktual tambahan yang terpisah untuk distribusi non-eksklusif atas versi jurnal yang diterbitkan dari suatu karya (misalnya, mempostingnya ke repositori institusional atau menerbitkannya dalam sebuah buku), dengan pengakuan atas penerbitan awalnya di jurnal ini.
- Penulis diizinkan dan didorong untuk mengunggah karya mereka secara daring (misalnya, di repositori institusi atau di situs web mereka) sebelum dan selama proses penyerahan, karena hal ini dapat mengarah pada pertukaran yang produktif, serta kutipan yang lebih awal dan lebih banyak dari karya yang diterbitkan (Lihat Pengaruh Akses Terbuka ).





.png)
.png)
